DX-207A Neutralizing light agent
Product Features
This product is a dark brown translucent liquid, which is synthesized by decontaminating agent, corrosion inhibitor and whitening agent. This product is acidic and does not contain any harmful heavy metal components (trivalent chromium is not included), which is completely environmentally friendly and non-chromic. It is used in the neutralization and light-emitting process of aluminum alloy. It can quickly remove the ash from the surface of the aluminum and the polished aluminum after oxidation, complexation and weak etching. It has strong ash removal and light enhancement. Any corrosive, used in combination with sulfuric acid, low cost, small dosage and simple operation process.
Process parameters
Tank maintenance
Precautions
Packaging and storage
DX-207A              3-10%(10% can be used without sulfuric acid, added separately)
Sulfuric acid         8-15% Water                   Margin Temperature        Normal temperature Time                     15-30s
In the production process, if the light-emitting time is long or the decontamination is not clean, the product and sulfuric acid may be appropriately added according to practical experience; — When there is too much sediment at the bottom of the bath, the bottom sediment should be drained and the reagent can be used normally. If it
    is not cleaned, the dosage will be increased.
In the production process, if the light-emitting time is long or the decontamination is not clean, the product and sulfuric acid may be
   appropriately added according to practical experience;
— This product is an acidic agent to avoid contact with alkali drugs; — If you use it, you need to wear labor insurance products. If you accidentally contact with the skin, please rinse it with plenty of water immediately.
   If it is serious, you should send it to the doctor in time.

This product is packed in 25kg plastic drum, which is heat-proof and moisture-proof during storage and transportation.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
DX-207B Neutralizing light agent
Product Features
This product is a colorless granular powder, which is synthesized by strong oxidizing agent, detergent, corrosion inhibitor and whitening agent. This product is acidic and does not contain any harmful heavy metal components (trivalent chromium is not included), which is completely environmentally friendly and non-chromic. It is used for the neutralization of the profile and through the strong oxidation, complexation and weak etching, it can quickly remove the ash on the surface of the aluminum after alkali corrosion, has strong ash removal and whitening effect, and the operation process is simple. After the product is neutralized and lighted, it can be placed in the air for 24 hours or less without eroding the surface of the aluminum to achieve the chromic anhydride effect.
Process parameters
Tank maintenance
Precautions
Packaging and storage
DX-207B                30-40g/L
Water                    Margin
Temperature         Normal temperature
Time                      10-20s
In the production process, the product can be supplemented according to practical experience when the light-emitting time is long or the decontamination is not clean.
When there is too much sediment at the bottom of the bath, the bottom sediment should be drained and the medicine can be used normally. If
     not cleaned, it will increase the consumption of chemicals.
Reference consumption: 3 ~ 4 kg / T aluminum profiles (with 500 ~ 550m2 / T aluminum profiles for reference).
This product is an acidic agent to avoid contact with alkali drugs.
Wear protective equipment when using the product. If you accidentally contact with the skin, please rinse it with plenty of water immediately. If
     it is serious, you should promptly send it to the doctor.
This product is packed in 20kg woven bag, which is heat-proof and moisture-proof during storage and transportation.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
DX-207C  Neutralizing light agent
Product Features
This product is a white granular powder, which is synthesized by strong oxidizing agent, detergent, corrosion inhibitor and whitening agent. This product is weakly alkaline and does not contain any harmful heavy metal components (trivalent chromium is not included). It is completely environmentally friendly and non-chromic. It can be used with oxidized waste liquid to reduce wastewater discharge and reduce the cost of three waste treatment. It is used in the neutralization tank of aluminum profile. It can quickly remove the ash on the surface of aluminum after alkali etching by strong oxidation, complexation and weak etching. It has strong ash removal and whitening effect, and the operation process is simple.
Process parameters
Tank maintenance
Precautions
Packaging and storage
DX-207C                10-20g/L
Sulfuric acid           100-200g/L (Or oxidizing waste liquid 100%)
Water                     Margin
Temperature          Normal temperature
Time                       10-20s
For the two-acid chemical polishing ash and the highly corrosive high-purity aluminum material, it is recommended to add 50-60g/L of nitric acid to the above bath to completely remove the black ash from the surface of the workpiece and prevent corrosion.
In the production process, the product can be supplemented according to practical experience when the light-emitting time is long or the decontamination is not clean.
When there is too much sediment at the bottom of the bath, the bottom sediment should be drained and the medicine can be used normally. If
     not cleaned, it will increase the consumption of chemicals.
Reference consumption: 1 ~ 2 kg / T aluminum profiles (with 500 ~ 550m2 / T aluminum profiles for reference).
When this product is added, a large amount of foam will be generated. When adding, it should be added slowly in small portions to prevent was
     te from overflowing.
This product is a weakly alkaline agent to avoid contact with acids and reducing agents.
Wear protective equipment when using the product. If you accidentally contact with the skin, please rinse it with plenty of water immediately. If
     it is serious, you should promptly send it to the doctor.
This product is packed in 20kg woven bag, which is heat-proof and moisture-proof during storage and transportation.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
DX-207D Neutralizing light agent
Product Features
This product is colorless crystal granules, synthesized by strong oxidizing agents, detergents, whitening agents, etc.; this product is weakly acidic, does not contain any harmful heavy metal components (trivalent chromium is not included), completely in line with environmental protection. Chromating; no need to add nitric acid, will not cause excessive corrosion on the surface of aluminum alloy, reduce the total ammonia nitrogen in production wastewater; use with oxidized waste liquid, reduce wastewater discharge, reduce the cost of three waste treatment; used for aluminum profile neutralization tank, Through strong oxidation, complexation and weak etching, the ash hanging on the surface of the aluminum after alkali etching or acid etching can be quickly removed, which has strong ash removal and whitening effect, and the operation process is simple.
Process parameters
Tank maintenance
Precautions
Packaging and storage
DX-207D               10-20g/L
Sulfuric acid          150-200g/L (Or oxidizing waste liquid 100%)
Water                    Margin
Temperature         Normal temperature
Time                     10-20s
In the production process, the product can be supplemented according to practical experience when the light-emitting time is long or the decontamination is not clean.
When there is too much sediment at the bottom of the bath, the bottom sediment should be drained and the medicine can be used normally. If
     not cleaned, it will increase the consumption of chemicals.
Reference consumption: 1 ~ 2 kg / T aluminum profiles (with 500 ~ 550m2 / T aluminum profiles for reference).
When using the first time slotting, if using sulfuric acid, please allow the bath to cool to room temperature before adding this product.
When adding this product, add it directly into the oxidizing waste liquid or 15-20% sulfuric acid solution, stir it and dissolve it, then use it;
This product is a weakly acidic agent, avoiding contact with alkalis and reducing agents;
Wear protective equipment when using the product. If you accidentally contact with the skin, please rinse it with plenty of water immediately. If
     it is serious, you should promptly send it to the doctor.
This product is packaged in 25kg woven bag, which is heat-proof and moisture-proof during storage and transportation.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
友情链接:氧化整流器  
CSD
 
 
 Contact Details
consumer hotline:021-67247422
Mobile phone:18321084251
E-mail:360770108@qq.com