DEGREASING  CLEANING  SERIES
除油清洁系列
——
DX-100
Degreasing and degreasing agent
Product Features
This product is a transparent or light yellow liquid, which is synthesized by strong oxidizing agents, corrosion inhibitors, brighteners, ash inhibitors, high-efficiency deoiling additives, chelating additives, etc.; this product is acidic, through various inorganic acids and oxidants. Weak etch, effectively dissolve, loosen natural oxide film, oil stain, carbon deposit, has the dual functions of descaling and surface oil staining. The treated profile can be directly oxidized, simplifying the pre-oxidation treatment process; Corrosion agents and surfactants overcome the disadvantages of incompletely solidified aluminum materials (such as refining, insufficient quenching air volume, severe segregation of crystals), sanding, bright crystals, etc., and have the effect of rapid degreasing without heating one step in place. It overcomes the drawbacks of traditional degreasing and heating, reduces costs, improves work efficiency, and reduces air pollution in the workshop.
Process parameters
Tank maintenance
Precautions
Packaging and storage
DX-100                 3-5% ( If the oil is thick, use the upper limit to achieve the desired effect. ) Water                   Margin
Time                     3-10 min  (Reasonable adjustment according to the surface oil condition of the workpiece) Temperature        Normal temperature
This product consumes less, depending on the efficiency of degreasing; — When there is too much oil floating on the surface of the tank, it should be salvaged immediately to avoid secondary pollution to the
    workpiece after degreasing;
When there is too much sediment (fat floc) at the bottom of the bath, the bottom sediment should be drained and the reagent can be used
    normally. If it is not cleaned, the dosage will be increased.
— This product is an acidic agent to avoid contact with alkali drugs; — If you use it, you need to wear labor insurance products. If you accidentally contact with the skin, please rinse it with plenty of water immediately.
    If it is serious, you should send it to the doctor in time.
— The bath avoids vigorous agitation of the air, and due to the presence of surfactants, the foam is rich and overflows.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
DX-101
Neutral degreasing powder
Product Features
This product is white or light yellow granular powder. It is synthesized by non-ionic surfactant, chelating additive, precious rare earth, calcium, magnesium ion dispersing agent, flocculating agent and corrosion inhibitor. This product does not corrode aluminum alloy. And can maintain the surface gloss of the workpiece, which is mainly developed for the removal of oil stain during the secondary oxidation of the inverted processing oxidation method; the product does not damage the oxide film layer, thereby better protecting the anodized film layer, avoiding defects, reducing costs, and improving work. effectiveness.
Process parameters
Tank maintenance
Precautions
Packaging and storage
DX-101                 20-30g/L
Water                    Margin
Time                      3-6 min (Reasonable adjustment according to the surface oil condition of the workpiece)
Temperature         50-70 C
This product consumes less, depending on the efficiency of degreasing;
When there is too much oil floating on the surface of the tank, it should be salvaged immediately to avoid secondary pollution to the workpiece  
     after degreasing;
When there is too much sediment or floc at the bottom of the bath, the bottom sediment should be drained and the reagent can be used norma
     lly. If it is not cleaned, the dosage will be increased.
This product is a weakly alkaline agent to avoid contact with acid drugs;
The bath avoids vigorous agitation of the air, and due to the presence of surfactants, the foam is rich and overflows.
This product is packed in 20kg woven bag, which is heat-proof and moisture-proof during storage and transportation.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
DX-102
Phosphorus-free skim powder
Product Features
This product is a new environmentally friendly product, white to light yellow granular powder, synthesized by surfactant, high-efficiency degreasing additive, chelating additive, precious rare earth, calcium, magnesium ion dispersing agent, corrosion inhibitor, etc.; this product is not Containing phosphate and silicate, it completely achieves no phosphating and quickly removes oil; this product is weakly alkaline, does not corrode aluminum alloy, and can maintain the surface gloss of the workpiece.
Process parameters
Tank maintenance
Precautions
Packaging and storage
DX-102                  3-4% (If the oil is thick, use the upper limit to achieve the desired effect.)
Water                    Margin
Time                      3-10 min ( Reasonable adjustment according to the surface oil condition of the workpiece)
Temperature         50-60℃
This product consumes less, depending on the efficiency of degreasing;
When there is too much oil floating on the surface of the tank, it should be salvaged immediately to avoid secondary pollution to the workpi
     ece after degreasing;
When there is too much sediment or floc at the bottom of the bath, the bottom sediment should be drained and the reagent can be used nor
     mally. If it is not cleaned, the dosage will be increased.
This product is a weakly alkaline agent to avoid contact with acid drugs;
The bath avoids vigorous agitation of the air, and due to the presence of surfactants, the foam is rich and overflows.
This product is packed in 20kg woven bag, which is heat-proof and moisture-proof during storage and transportation.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
DX-103
Degreasing and dewaxing powder
Product Features
This product is a white or light yellow granular powder. It is synthesized by non-ionic surfactant, high-efficiency dewaxing additive, chelating additive, precious rare earth, calcium, magnesium ion dispersing agent and corrosion inhibitor. This product is weak. Alkaline, basically does not corrode aluminum alloy, and can maintain the surface gloss of the workpiece. It has the effect of removing oil and dewaxing in one step, overcomes the disadvantages of degreasing after dewaxing, reduces cost and improves work efficiency.
Process parameters
Tank maintenance
Precautions
Packaging and storage
DX-103                 30-50g/L ( If the polishing wax is thick, the upper limit is used to achieve the desired effect. )
Water                   Margin
Time                     3-10 min  ( Reasonably adjusted according to the surface oil stain or polished wax block )
Temperature        60-80 C (Temperature recommended for dewaxing operation 70-80 degrees)
If you configure an ultrasonic device, the DX-103 30g/L can achieve the desired result at 55-60 degrees.
The consumption of this product is small, and it can be added according to the efficiency of dewaxing of oil removal;
When there is too much oil floating on the surface of the tank, it should be salvaged immediately to avoid secondary pollution to the workpiece
     after degreasing;
When there is too much sediment or floc at the bottom of the bath, the bottom sediment should be drained and the reagent can be used norma
     lly. If it is not cleaned, the dosage will be increased.
This product is a weakly alkaline agent to avoid contact with acid drugs;
The bath avoids vigorous agitation of the air, and due to the presence of surfactants, the foam is rich and overflows.
In actual production, if wax or black plaque is attached to the surface of the workpiece after deoiling and dewaxing, it can be easily washed in the
    subsequent washing water without increasing the processing time.
This product is packed in 20kg woven bag, which is heat-proof and moisture-proof during storage and transportation.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
DX-105
Aluminum alloy degreasing powder
Product Features
This product is a white to light yellow mixed granular powder, which is synthesized by surfactant, high-efficiency degreasing additive, chelating additive, precious rare earth, calcium, magnesium ion dispersing agent, corrosion inhibitor, etc.; this product is weakly alkaline It can completely remove the oil stain on the surface of aluminum alloy, and it is better with ultrasonic wave.
Process parameters
Tank maintenance
Precautions
Packaging and storage
DX-105                 3-5% (If the oil is thick, use the upper limit to achieve the desired effect.)
Water                   margin
Time                     3-10 min (Reasonably adjusted according to the surface oil stain or polished wax block)
Temperature        50-60℃
The consumption of this product is small, and it can be added according to the efficiency of dewaxing of oil removal;
When there is too much oil floating on the surface of the tank, it should be salvaged immediately to avoid secondary pollutionto the
     workpiece after degreasing;
When there is too much sediment or floc at the bottom of the bath, the bottom sediment should be drained and the reagent can be
     used normally. If it is not cleaned, the dosage will be increased.
This product is a weakly alkaline agent to avoid contact with acid drugs;
The bath avoids vigorous agitation of the air, and due to the presence of surfactants, the foam is rich and overflows.
This product is packed in 20kg woven bag, which is heat-proof and moisture-proof during storage and transportation.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
友情链接:氧化整流器  
CSD
 
 
 Contact Details
consumer hotline:021-67247422
Mobile phone:18321084251
E-mail:360770108@qq.com